AD8629ARZ-REEL7 OverviewThere is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called Zero-Drift-types. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 5μV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 2.2mA . 145dB should be the voltage gain. Op amp ic has 2 channels. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. The operating supply voltage of the buffer op amp is rated at 3V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 1.1mA quiescent current running through op amp ic.
AD8629ARZ-REEL7 Features8 Pins
supply voltage of 5V
145dB voltage gain
Output Type: Rail-to-Rail
AD8629ARZ-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
AD8629ARZ-REEL7 Instrumentational OP Amps applications.
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
Factory Lead Time | 10 Weeks |
Contact Plating | Tin |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Surface Mount | YES |
Number of Pins | 8 |
Operating Temperature | -40°C~125°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e3 |
Pbfree Code | no |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Packing Method | TAPE AND REEL |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 2 |
Supply Voltage | 5V |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | AD8629 |
Pin Count | 8 |
Output Type | Rail-to-Rail |
Operating Supply Voltage | 3V |
Number of Channels | 2 |
Operating Supply Current | 2.2mA |
Quiescent Current | 1.1mA |
Slew Rate | 1V/μs |
Architecture | CHOPPER-STAB |
Amplifier Type | Zero-Drift |
Common Mode Rejection Ratio | 140 dB |
Current - Input Bias | 30pA |
Voltage - Supply, Single/Dual (±) | 2.7V~5V ±1.35V~2.5V |
Output Current per Channel | 30mA |
Input Offset Voltage (Vos) | 5μV |
Gain Bandwidth Product | 2.5MHz |
Unity Gain BW-Nom | 2500 kHz |
Voltage Gain | 145dB |
Average Bias Current-Max (IIB) | 0.0015μA |
Power Supply Rejection Ratio (PSRR) | 130dB |
Low-Offset | YES |
Frequency Compensation | YES |
Supply Voltage Limit-Max | 6V |
Voltage - Input Offset | 1μV |
Low-Bias | YES |
Micropower | NO |
Bias Current-Max (IIB) @25C | 0.0001μA |
Programmable Power | NO |
Input Capacitance | 10pF |
Wideband | NO |
Height | 1.5mm |
Length | 5mm |
Width | 4mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Contains Lead |