ADA4932-1YCPZ-R2 OverviewA 16-VFQFN Exposed Pad, CSP case is used to package the op amp. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 16 terminations in the next few months. There are a total of 16 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 16 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2.2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~105°C . An 9.6mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 9V. 16MOhm should be the range of resistance for the linear amplifier. Op amp's interface IC type can be classified as LINE DRIVER.
ADA4932-1YCPZ-R2 Features16 Pins
supply voltage of 5V
66dB voltage gain
Resistance of 16MOhm
ADA4932-1YCPZ-R2 ApplicationsThere are a lot of Analog Devices Inc.
ADA4932-1YCPZ-R2 Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 16MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ADA4932 |
| Pin Count | 16 |
| Operating Supply Voltage | 9V |
| Number of Channels | 1 |
| Operating Supply Current | 9.6mA |
| Nominal Supply Current | 9.6mA |
| Slew Rate | 2800V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 87 dB |
| Current - Input Bias | 2.5μA |
| Voltage - Supply, Single/Dual (±) | 3V~11V ±1.5V~5.5V |
| Output Current per Channel | 80mA |
| Input Offset Voltage (Vos) | 2.2mV |
| Bandwidth | 560MHz |
| Differential Output | YES |
| Voltage Gain | 66dB |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Output Polarity | COMPLEMENTARY |
| Voltage - Input Offset | 500μV |
| Interface IC Type | LINE DRIVER |
| Driver Number of Bits | 1 |
| Dual Supply Voltage | 5V |
| Interface Standard | GENERAL PURPOSE |
| Negative Supply Voltage-Nom | -5V |
| Out Swing-Min | 3.2 V |
| Height | 830μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4932-1YCPZ-R2 Datasheet
+8613715157867