AD9901KPZ Overview
As a clock IC, it is packaged by the Tube method. The 20-LCC (J-Lead) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 20 terminations. Basically, this time clock generator needs a voltage of 5V. There is a Clock PLL called CMOS, ECL, TTL which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 5.25V. A maximum voltage of 4.75V should be used for this frequency generator for safety reasons. There should be 5V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, ECL, TTL logic levels. As far as this electronic part is concerned, it can be classified as a Digital Phase/Frequency Discriminator component. Microprocessor-specific clock PLL with 20 bits. The related electronic parts of part number AD9901 are listed below. There are 20 pins that are available on the clock PLL. ALSO OPERATES AT -5.2 V SUPPLY is included in this frequency generator to enhance clock signal output. High efficiency is achieved when operating at a frequency of 200MHz. For its full function, a supply current of 54mA is required. This RF synthesizer operation requires a maximum current of 54mA.
AD9901KPZ Features
Available in the 20-LCC (J-Lead)
Supply voltage of 5V

AD9901KPZ Applications
There are a lot of Analog Devices Inc.
AD9901KPZ Clock Generators applications.

Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment

Lifecycle Status	PRODUCTION (Last Updated: 5 days ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Number of Pins	20
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Digital Phase/Frequency Discriminator
Additional Feature	ALSO OPERATES AT -5.2 V SUPPLY
Voltage - Supply	5V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Frequency	200MHz
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	AD9901
Output	CMOS, ECL, TTL
Pin Count	20
Supply Voltage-Max (Vsup)	5.25V
Power Supplies	5/-5.2V
Supply Voltage-Min (Vsup)	4.75V
Number of Circuits	1
Operating Supply Current	54mA
Nominal Supply Current	54mA
Power Dissipation	270mW
Max Supply Current	54mA
Input	CMOS, ECL, TTL
Ratio - Input:Output	2:1
PLL	Yes
Differential - Input:Output	Yes/Yes
Divider/Multiplier	No/No
Height	3.68mm
Length	9.04mm
Width	9.04mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead