ADA4851-1WYRJZ-R7 OverviewIt is packaged in an SOT-23-6-case that protects the operational amplifiers from damage. An op amp of this type is a Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 6 terminations this year. A total of 6 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 6 pins. Op amp ic rates 3.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 3.2mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 107dB. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. Buffer op amp series numbers are indicated by the Automotive. The quiescent current is 3.2mA.
ADA4851-1WYRJZ-R7 Features6 Pins
supply voltage of 5V
107dB voltage gain
Output Type: Rail-to-Rail
ADA4851-1WYRJZ-R7 ApplicationsThere are a lot of Analog Devices Inc.
ADA4851-1WYRJZ-R7 Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 10 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | ADA4851 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Channels | 1 |
| Operating Supply Current | 3.2mA |
| Nominal Supply Current | 3.2mA |
| Output Current | 5mA |
| Quiescent Current | 3.2mA |
| Slew Rate | 375V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 2.2μA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V ±1.35V~6V |
| Output Current per Channel | 83mA |
| Input Offset Voltage (Vos) | 3.5mV |
| Bandwidth | 130MHz |
| Gain Bandwidth Product | 70MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 107dB |
| Average Bias Current-Max (IIB) | 4.5μA |
| Power Supply Rejection Ratio (PSRR) | 101dB |
| Voltage - Input Offset | 600μV |
| Settling Time | 55 ns |
| -3db Bandwidth | 105MHz |
| Input Capacitance | 1.2pF |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADA4851-1WYRJZ-R7 Datasheet
+8613715157867