ADF4002BRUZ Overview
As a clock IC, PLLs is packaged using the Tube method. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 16 terminations can be found in frequency synthesizer. Basically, a voltage of 3V should be applied to this electronic frequency generator. CMOS, TTL is designed as this clock generator's input. This component can be conveniently installed on the panel thanks to the Surface Mount. The supply voltage for this frequency synthesizer should be kept above 2.7V for safety considerations. Clock PLL works with 2.7V~3.3V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with Clock logic levels. This electronic component can be classified as a Clock/Frequency Synthesizer (RF), Phase Detector. This clock-generating IC is a 16-bit device designed explicitly for microprocessors. According to the base part number ADF4002, its related parts can be found. There is an available 16 pin on the clock generators. RF synthesizers can handle voltages up to 3V. Clock PLL is facilitated with 1 signal outputs to magnify output frequency as high as possible. Frequency generator is able to reali400MHze high efficiency when operating at a frequency of 400MHz. A supply current of 5mA needs to be provided to fully play RF synthesizer's function. The maximal current supplied for this frequency synthesizer operation reaches 6mA.
ADF4002BRUZ Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V

ADF4002BRUZ Applications
There are a lot of Analog Devices Inc.
ADF4002BRUZ Clock Generators applications.

Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks

Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Type	Clock/Frequency Synthesizer (RF), Phase Detector
Voltage - Supply	2.7V~3.3V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Frequency	400MHz
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADF4002
Output	Clock
Pin Count	16
Number of Outputs	1
Operating Supply Voltage	3V
Power Supplies	3V
Supply Voltage-Min (Vsup)	2.7V
Operating Supply Current	5mA
Nominal Supply Current	5mA
Max Supply Current	6mA
Bandwidth	400MHz
Input	CMOS, TTL
Ratio - Input:Output	2:1
PLL	Yes with Bypass
Differential - Input:Output	Yes/No
Height	1.05mm
Length	5mm
Width	4.4mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead