LMX2372SLBX OverviewClock ICs are packaged using the Tape & Reel (TR) method. In the 24-TFQFN, CSP package, there is an embedded clock generator. A maximum temperature of NOT SPECIFIED can be sustained by this clock generator ic during reflowing. There are a total of 24 terminations in this file. A voltage of 3V should be applied to this electronic frequency generator. In this case, CMOS, TTL is designed to be the input of the clock generator. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 1.2GHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. There is a maximum voltage of 5.5V for this clock generator. Keeping the supply voltage for this frequency synthesizer above 2.7V is recommended for safety reasons. There are 2.7V~5.5V available for use with this clock PLL. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. There are several logic levels in CMOS logic that can be used with this clock generator. It is possible to classify this electronic component as a PLL Frequency Synthesizer. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. The related electrical components for the base part number LMX2372 can be found below. It is part of the PLLatinum™ series of electronic components. There should be no more than 6mA of supply current for this time clock generator.
LMX2372SLBX FeaturesAvailable in the 24-TFQFN, CSP
Supply voltage of 3V
LMX2372SLBX ApplicationsThere are a lot of Texas Instruments
LMX2372SLBX Clock Generators applications.
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TFQFN, CSP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | PLLatinum™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | PLL Frequency Synthesizer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LMX2372 |
| Output | CMOS |
| Pin Count | 24 |
| JESD-30 Code | R-CQCC-N24 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 1 |
| Nominal Supply Current | 4mA |
| Frequency (Max) | 1.2GHz |
| Supply Current-Max (Isup) | 6mA |
| Input | CMOS, TTL |
| Ratio - Input:Output | 3:1 |
| PLL | Yes with Bypass |
| Differential - Input:Output | Yes/No |
| Length | 4.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LMX2372SLBX Datasheet
+8613715157867