ADF4106BRU-REEL7 OverviewAs a clock IC, it is packaged by the Tape & Reel (TR) method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 240 during reflowing. As you can see, it consists of 16 terminations. Basically, this time clock generator needs a voltage of 3V. There is a Clock PLL called CMOS, TTL which is designed to be the input to this clock generator. RF synthesizers based on this clock provide frequencies up to 6GHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. A maximum voltage of 2.7V should be used for this frequency generator for safety reasons. There should be 2.7V~3.3V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with Clock logic levels. As far as this electronic part is concerned, it can be classified as a Clock/Frequency Synthesizer (RF) component. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number ADF4106 are listed below. There are 16 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 3V as the supply voltage. The output frequency can be magnified as high as possible with the assistance of 1 signal outputs. For its full function, a supply current of 13mA is required.
ADF4106BRU-REEL7 FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V
Operating supply voltage of 3V
ADF4106BRU-REEL7 ApplicationsThere are a lot of Analog Devices Inc.
ADF4106BRU-REEL7 Clock Generators applications.
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Contact Plating | Lead, Tin |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
Number of Pins | 16 |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e0 |
Pbfree Code | no |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 16 |
ECCN Code | EAR99 |
Type | Clock/Frequency Synthesizer (RF) |
Voltage - Supply | 2.7V~3.3V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 240 |
Number of Functions | 1 |
Supply Voltage | 3V |
Terminal Pitch | 0.65mm |
Reach Compliance Code | not_compliant |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | ADF4106 |
Output | Clock |
Pin Count | 16 |
Number of Outputs | 1 |
Qualification Status | Not Qualified |
Operating Supply Voltage | 3V |
Power Supplies | 3V |
Supply Voltage-Min (Vsup) | 2.7V |
Operating Supply Current | 13mA |
Nominal Supply Current | 10.5mA |
Frequency (Max) | 6GHz |
Input | CMOS, TTL |
Ratio - Input:Output | 2:1 |
PLL | Yes |
Differential - Input:Output | Yes/No |
Length | 5mm |
Width | 4.4mm |
RoHS Status | Non-RoHS Compliant |
Lead Free | Contains Lead |