CDC5801ADBQR OverviewAs a clock IC, it uses the Tape & Reel (TR) package. 24-SSOP (0.154, 3.90mm Width) contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 24 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by LVCMOS, LVTTL as its input. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with LVDS, LVPECL, LVTTL logic levels. This is an electronic part that can be classified as a PLL Multiplier/Divider in this case. In particular, this clock PLL is designed to be used with microprocessors. CDC5801 is the base part number for finding related electronic parts. There is a 24 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. 1 signal outputs allow for maximi1ation of output frequency. The CDC family of parts can be used to find electric parts that are similar to each other. At a frequency of 500MHz, the system can achieve high efficiency. This electronic frequency generator is well suited to the TR package.
CDC5801ADBQR FeaturesAvailable in the 24-SSOP (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC5801ADBQR ApplicationsThere are a lot of Texas Instruments
CDC5801ADBQR Clock Generators applications.
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
Factory Lead Time | 6 Weeks |
Contact Plating | Gold |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 24-SSOP (0.154, 3.90mm Width) |
Number of Pins | 24 |
Weight | 129.500622mg |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 2 (1 Year) |
Number of Terminations | 24 |
Type | PLL Multiplier/Divider |
Packing Method | TR |
Voltage - Supply | 3V~3.6V |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.64mm |
Frequency | 500MHz |
Base Part Number | CDC5801 |
Output | LVDS, LVPECL, LVTTL |
Pin Count | 24 |
Number of Outputs | 1 |
Operating Supply Voltage | 3.3V |
Supply Voltage-Max (Vsup) | 3.6V |
Supply Voltage-Min (Vsup) | 3V |
Nominal Supply Current | 70mA |
Power Dissipation | 1.4W |
Family | CDC |
Input | LVCMOS, LVTTL |
Ratio - Input:Output | 1:1 |
PLL | Yes with Bypass |
Differential - Input:Output | No/Yes |
Divider/Multiplier | Yes/Yes |
fmax-Min | 62.5 MHz |
Height | 1.75mm |
Length | 8.65mm |
Width | 3.9mm |
Thickness | 1.5mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Contains Lead |