ADSP-21062KS-160 OverviewAn electronic component available in package 240-BFQFP Exposed Pad.Tray packaging is provided for it.Its Floating Point status makes it ideal for a wide range of applications.It is mounted in the direction of Surface Mount as shown in the image below.If it is operating at the temperature of 0°C~85°C TC, then it will be operating normally.This refers to the analog voltage range that can be input or output from 5.00V.There are several digital signal processors in the SHARC® series, including this one.In terms of its uses, it has 240 terminations.5V provides the supply voltage for it.The 240 component has pins.There are 240 pins in its configuration.The base part number ADSP-21062 can be used to identify many associated parts.To operate at 40MHz frequency, the device has a specific design.Mounting is accomplished using Surface Mount.In this device, the minimum voltage is 4.75V.It can be supplied with a maximum voltage of 5.25V.A supply voltage of 5V is required for its operation.It receives electricity from 5V.Timers and counters that measure time and count external events are also called 1 timers and counters.An architecture of SHARC is adopted by this processor core.Interrupts caused by an external source cause 3 interrupts.This device stores 32 information.For data transfer, 10 DMA channels are available without overloading the CPU.In serial 2 I/Os, data is transmitted between devices.
ADSP-21062KS-160 FeaturesSupplied in the 240-BFQFP Exposed Pad package
Operating supply voltage of 5V
1 timers/counters
3 external interrupts
ADSP-21062KS-160 ApplicationsThere are a lot of Analog Devices Inc.
ADSP-21062KS-160 DSP applications.
Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
Digital image processing, data compression
Video coding, audio coding
Image compression
Signal processing for telecommunications
Control systems
Biomedical engineering
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 240-BFQFP Exposed Pad |
| Number of Pins | 240 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 240 |
| Type | Floating Point |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21062 |
| Pin Count | 240 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Host Interface, Link Port, Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 256kB |
| Number of Bits | 32 |
| Supply Current-Max | 850mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Address Bus Width | 32 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 2000000 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 1 |
| Non-Volatile Memory | External |
| Number of DMA Channels | 10 |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-21062KS-160 Datasheet
+8613715157867