ADSP-21489BSWZ-4A OverviewAn electronic component available in package 100-LQFP Exposed Pad.Tray packaging is provided for it.Its Floating Point status makes it ideal for a wide range of applications.It is mounted in the direction of Surface Mount as shown in the image below.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.This refers to the analog voltage range that can be input or output from 3.30V.There are several digital signal processors in the SHARC® series, including this one.In terms of its uses, it has 100 terminations.1.1V provides the supply voltage for it.The 100 component has pins.There are 100 pins in its configuration.The base part number ADSP-21489 can be used to identify many associated parts.To operate at 450MHz frequency, the device has a specific design.Mounting is accomplished using Surface Mount.In this device, the minimum voltage is 1.05V.It can be supplied with a maximum voltage of 3.47V.A supply voltage of 1.1V is required for its operation.Its memory can be used to store 5MB data.An architecture of SHARC is adopted by this processor core.16 I/Os are included with the device.It uses the ROMless memory type.The embedded system uses short-range 2 SPI channels for communication.Communication between more Ics is set up using 1 I2C channels.
ADSP-21489BSWZ-4A FeaturesSupplied in the 100-LQFP Exposed Pad package
Operating supply voltage of 1.1V
16 I/Os
ADSP-21489BSWZ-4A ApplicationsThere are a lot of Analog Devices Inc.
ADSP-21489BSWZ-4A DSP applications.
Financial signals
Other sensor array processing
Spectral density estimation
Statistical signal processing
Digital image processing, data compression
Video coding, audio coding
Image compression
Signal processing for telecommunications
Control systems
Biomedical engineering
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Factory Lead Time | 12 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP Exposed Pad |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Floating Point |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 450MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21489 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.1V |
| Interface | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.05V |
| Memory Size | 5MB |
| Number of I/O | 16 |
| Speed | 400 MHz |
| RAM Size | 640kB |
| Memory Type | ROMless |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Density | 4 Mb |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of I2C Channels | 1 |
| Non-Volatile Memory | External |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Clock Rate | 400MHz |
| Height | 1.45mm |
| Length | 14.2mm |
| Width | 14.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21489BSWZ-4A Datasheet
+8613715157867