ASM3P2812AF-08TR OverviewA clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. There is a clock generator embedded in the 8-TSSOP (0.173, 4.40mm Width) package. This clock generator will sustain a maximum temperature of NOT SPECIFIED when reflown. There are 8 terminations found in the file. The clock generator ic should be grounded with a voltage of 3.3V. This clock generator receives its inputs from CMOS, TTL, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 80MHz Max can be achieved with this clock-based frequency synthesizer. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As long as there are 3V~3.6V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. It's compatible with CMOS, TTL logic levels. As far as electrical parts go, this component can be classified as a Frequency Modulator, Spread Spectrum Clock Generator component. There is a 8-bit clock-generating IC built specifically for microprocessors in this frequency generator. These related electrical parts are available for the base part number ASM3P28**. The supply voltage should be maintained at 3.3V for high efficiency.
ASM3P2812AF-08TR FeaturesAvailable in the 8-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
ASM3P2812AF-08TR ApplicationsThere are a lot of ON Semiconductor
ASM3P2812AF-08TR Clock Generators applications.
Wireless infrastructure
Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Frequency Modulator, Spread Spectrum Clock Generator |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ASM3P28** |
| Output | CMOS, TTL |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 80MHz |
| Halogen Free | Halogen Free |
| Input | CMOS, TTL |
| Ratio - Input:Output | 1:1 |
| Primary Clock/Crystal Frequency-Nom | 40MHz |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Divider/Multiplier | Yes/No |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |