BD3481FS-E2 OverviewThe book is also accompanied by a case, which only adds to the value of the book. As a mounting type, Surface Mount is recommended for it. A SSOP case has been embedded with it. I have a device with 4 channels attached to it. This chip has 20 terminations, which means it has 20 terminations on it. The BD3481 family of parts can be found by searching for a part number that is similar to it. As far as the 20 pins on the chip are concerned, they are accessible. It is possible to sort the consumer IC type of a part using TONE CONTROL CIRCUIT. It is important that the minimum supply voltage (Vsup) for this part is greater than 7V. The voltage can be given at 8.5V volts. Max supply voltage (Vsup) reaches 9.5V. In order to mount it, Surface Mount is required. A 2 band is attached to it. When the temperature of the sensor is below 85°C, it is recommended that you use it. During operation, the chip is not operated below the operating temperature of -40°C. 20-pins are present on the chip.
BD3481FS-E2 FeaturesWith SSOP channels
consumer IC type: TONE CONTROL CIRCUIT
BD3481FS-E2 ApplicationsThere are a lot of ROHM Semiconductor
BD3481FS-E2 Audio Special Purpose applications.
Replacement of DIR1703
Other Applications Requiring S/PDIF Receiver
Audio Differential Line Drivers
Audio Mix Consoles
Distribution Amplifiers
Graphic and P arametric Equalizers
Dynamic Range Processors
Digital Effects Processors
Telecom Systems
Hi-Fi Equipment
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BD3481 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 9.5V |
| Power Supplies | 8.5V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 7V |
| Number of Channels | 4 |
| Consumer IC Type | TONE CONTROL CIRCUIT |
| Number of Bands | 2 |
| Length | 8.7mm |
| Height Seated (Max) | 1.9mm |
| Width | 5.4mm |
| RoHS Status | ROHS3 Compliant |
+8613715157867