CALVC164245IGQLREP Overview
56-VFBGA contains it.Packaged in the way of Tape & Reel (TR).Tri-State, Non-Inverted is the output configured for it.Its translator type is Voltage Level.Mounting this electronic component follows the Surface Mount method.In this electrical device, the Channel type is Bidirectional.There is -40°C~85°C TA operating temperature.The circuit's superior flexibility is achieved through the use of 2 circuits.Transmission lines are terminated using 56 terminations.Parts that are related to LVC164245 can be identified based on its base part number.Power comes from a voltage of 3.3V.There are 56 pins on this device.The device is part of the 74ALVC series.The board has 56 pins.16 Bits are used in the design of this electronic part.Level translators is configured from 2.3V~3.6V for the VCCA supply rail.Level translators is configured from 3V~5.5V for the VCCB supply rail.A BUS TRANSCEIVER logic IC is used.In transmission lines, there are 2 terminations, which correspond to the characteristic impedance of the line.Electronic devices like this belong to the family ALVC/VCX/A.Power comes from a 3.35V supply.As a result of its reliable performance, it is well suited for TAPE AND REEL.In order to operate normally, Vsup must remain above 3V.
CALVC164245IGQLREP Features
56-VFBGA package
2 circuits
56 pin count
74ALVC series
56 pins
3.35V power supplies

CALVC164245IGQLREP Applications
There are a lot of Texas Instruments
CALVC164245IGQLREP voltage translators & level shifters applications.

Enterprise
Telecom
GPIO
MDIO
PMBus
SMBus
SDIO
UART
I2C
Automotive

Mounting Type	Surface Mount
Package / Case	56-VFBGA
Surface Mount	YES
Number of Pins	56
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	74ALVC
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	56
Packing Method	TAPE AND REEL
Terminal Position	BOTTOM
Terminal Form	BALL
Number of Functions	2
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Base Part Number	LVC164245
Pin Count	56
Qualification Status	Not Qualified
Output Type	Tri-State, Non-Inverted
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	3.35V
Supply Voltage-Min (Vsup)	3V
Number of Circuits	2
Load Capacitance	50pF
Number of Ports	2
Number of Bits	16
Propagation Delay	5.8 ns
Family	ALVC/VCX/A
Logic Function	Level Shifter
Output Characteristics	3-STATE
Output Polarity	TRUE
Logic IC Type	BUS TRANSCEIVER
Channel Type	Bidirectional
Control Type	COMMON CONTROL
Translation	3V & 5V
Translator Type	Voltage Level
Voltage - VCCA	2.3V~3.6V
Voltage - VCCB	3V~5.5V
Channels per Circuit	8
Length	7mm
Height Seated (Max)	1mm
Width	4.5mm
RoHS Status	ROHS3 Compliant