CDC339DBR Overview
It is available in the case 20-SSOP (0.209, 5.30mm Width) for this cut smart buffer. It is available in the case Tape & Reel (TR). There is a maximum value of 80MHz for normal operation. There are 20 terminations in it. Using a supply voltage of 5V allows for high efficiency. Consequently, it will be mounted by Surface Mount. There is a classification of Fanout Buffer (Distribution) for this electronic part. The temperature should be set to -40°C~85°C to ensure reliable performance. This circuit clock should be able to operate on a power supply of 4.75V~5.25V volts. It has a number of pins of 20. It is part of the CDC family of electronic buffer ICs. It's set to 5.25V for the maximum supply voltage (Vsup). To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 4.75V. It is possible to get 8 true outputs.
CDC339DBR Features
20 terminations
The operating temperature of -40°C~85°C degrees

CDC339DBR Applications
There are a lot of Rochester Electronics, LLC
CDC339DBR Clock Buffers & Drivers applications.

High performance communication system
Data center
Cloud computing
Network
High speed industry
High-end consumer electronics
Data communication
Telecommunications
Computing
Medical imaging

Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Mounting Type	Surface Mount
Factory Lead Time	8 Weeks
Package / Case	20-SSOP (0.209, 5.30mm Width)
Contact Plating	Tin
Surface Mount	YES
Operating Temperature	-40°C~85°C
Package / Case	8-SOIC (0.154, 3.90mm Width) Exposed Pad
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Number of Pins	8
Operating Temperature	-40°C~125°C
Pbfree Code	yes
Packaging	Tube
Part Status	Obsolete
JESD-609 Code	e3
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Pbfree Code	no
Number of Terminations	20
Part Status	Active
Type	Fanout Buffer (Distribution)
Terminal Finish	NICKEL PALLADIUM GOLD
Number of Terminations	8
Voltage - Supply	4.75V~5.25V
ECCN Code	EAR99
Terminal Position	DUAL
Terminal Position	DUAL
Terminal Form	GULL WING
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	AD8099
Pin Count	20
Pin Count	8
Operating Supply Voltage	10V
JESD-30 Code	R-PDSO-G20
Qualification Status	COMMERCIAL
Number of Channels	1
Supply Voltage-Max (Vsup)	5.25V
Operating Supply Current	16mA
Supply Voltage-Min (Vsup)	4.75V
Nominal Supply Current	15mA
Quiescent Current	16mA
Number of Circuits	1
Slew Rate	1350V/μs
Frequency (Max)	80MHz
Amplifier Type	Voltage Feedback
Family	CDC
Common Mode Rejection Ratio	105 dB
Output Characteristics	3-STATE
Current - Input Bias	6μA
Input	TTL
Voltage - Supply, Single/Dual (±)	5V~12V ±2.5V~6V
Ratio - Input:Output	1:8
Output Current per Channel	178mA
Differential - Input:Output	No/No
Input Offset Voltage (Vos)	500μV
Propagation Delay (tpd)	9 ns
Bandwidth	550MHz
fmax-Min	80 MHz
Gain Bandwidth Product	3 GHz
Neg Supply Voltage-Nom (Vsup)	-5V
Same Edge Skew-Max (tskwd)	0.9 ns
Unity Gain BW-Nom	3800000 kHz
Number of True Outputs	8
Voltage Gain	81dB
Length	7.2mm
Power Supply Rejection Ratio (PSRR)	80dB
Height Seated (Max)	2mm
Low-Offset	YES
Width	5.3mm
Frequency Compensation	YES
RoHS Status	ROHS3 Compliant
Supply Voltage Limit-Max	6.3V
Voltage - Input Offset	100μV
Settling Time	18 ns
Low-Bias	NO
Micropower	NO
-3db Bandwidth	510MHz
Programmable Power	NO
Dual Supply Voltage	5V
Input Capacitance	1.8pF
Input Voltage Noise Density	0.95nV/sqrt Hz
Height	1.65mm
Length	4.9mm
Width	3.9mm
REACH SVHC	No SVHC
Radiation Hardening	No
Lead Free	Contains Lead