CDC7005RGZT OverviewAs a clock IC, it uses the Tape & Reel (TR) package. 48-VFQFN Exposed Pad contains this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. As a result, frequency synthesizers can be found to contain 48 terminations. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by LVCMOS, LVPECL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. The Surface Mount allows this electrical component to be easily installed on the panel. It would be possible to supply this clock PLL with 3.6V of power. For safety reasons, this frequency generator's supply voltage should remain above 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Based on test statistics, ambient temperature should be set at -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with LVPECL logic levels. This is an electronic part that can be classified as a Clock Synchronizer and Jitter Cleaner in this case. In particular, this clock PLL is designed to be used with microprocessors. CDC7005 is the base part number for finding related electronic parts. There is a 48 pin that is available on the digital clock generator. The maximum supply voltage that clock generator can handle is 3.3V. 5 signal outputs allow for maximi5ation of output frequency. At 0.06 ns Max, this analog clock generator exhibits low timing skew. At a frequency of 800MHz, the system can achieve high efficiency. This electronic frequency generator is well suited to the TR package. The time clock generator uses 1 inputs.
CDC7005RGZT FeaturesAvailable in the 48-VFQFN Exposed Pad
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CDC7005RGZT ApplicationsThere are a lot of Texas Instruments
CDC7005RGZT Clock Generators applications.
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Weight | 138.005479mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | Clock Synchronizer and Jitter Cleaner |
| Packing Method | TR |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 800MHz |
| Base Part Number | CDC7005 |
| Output | LVPECL |
| Pin Count | 48 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 1 |
| Number of Inputs | 1 |
| Input | LVCMOS, LVPECL |
| Ratio - Input:Output | 2:5 |
| Max I(ol) | 0.006 A |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.06 ns |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CDC7005RGZT Datasheet
+8613715157867