CDCE706PWR Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. 20 terminations can be found in frequency synthesizer. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. LVCMOS, Crystal is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This clock-based frequency generator provides a frequency up to 300MHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. Clock PLL works with 3V~3.6V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with LVCMOS logic levels. This electronic component can be classified as a Spread Spectrum Clock Driver. This clock-generating IC is a 20-bit device designed explicitly for microprocessors. According to the base part number CDCE706, its related parts can be found. There is an available 20 pin on the clock generators. RF synthesizers can handle voltages up to 3.3V. Clock PLL is facilitated with 6 signal outputs to magnify output frequency as high as possible. Frequency generator is able to reali54MHze high efficiency when operating at a frequency of 54MHz. This is a 3-element clock generator with low jitter performance.
CDCE706PWR Features
Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CDCE706PWR Applications
There are a lot of Texas Instruments
CDCE706PWR Clock Generators applications.

Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks

Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Factory Lead Time	6 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Number of Pins	20
Weight	76.997305mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Type	Spread Spectrum Clock Driver
Max Power Dissipation	600mW
Voltage - Supply	3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Frequency	54MHz
Base Part Number	CDCE706
Output	LVCMOS
Pin Count	20
Number of Outputs	6
Operating Supply Voltage	3.3V
Number of Elements	3
Interface	I2C
Number of Circuits	1
Nominal Supply Current	90mA
Frequency (Max)	300MHz
Input	LVCMOS, Crystal
Ratio - Input:Output	1:6
Primary Clock/Crystal Frequency-Nom	200MHz
PLL	Yes with Bypass
Differential - Input:Output	Yes/No
Divider/Multiplier	Yes/Yes
Height	1.2mm
Length	6.5mm
Width	4.4mm
Thickness	1mm
REACH SVHC	Unknown
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free