SL23EP08SC-3T Overview
Tape & Reel (TR)-method packaging is used for clock ICs. The 16-SOIC (0.154, 3.90mm Width) package contains this clock generator. It contains 16 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be Clock. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 220MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.63V. For safety reasons, this frequency synthesizer should have a voltage supply above 2.97V. As far as the supply voltage is concerned, clock PLL can be used with 2.3V~3.6V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with LVCMOS logic levels. The clock-generating IC is a 16-bit device designed specifically for microprocessors. You can find related electrical components to the base part number SL23EP08. It is possible to connect to the frequency generators via 16 pins. This clock PLL features ALSO OPERATES WITH 2.25V TO 2.75V SUPPLY for better clock signal output. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.3 ns Max, this clock generator offers low timing skew. When searching for parts of the S family, similar frequency generators will be found.
SL23EP08SC-3T Features
Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V

SL23EP08SC-3T Applications
There are a lot of Silicon Labs
SL23EP08SC-3T Clock Generators applications.

Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange

Factory Lead Time	6 Weeks
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Weight	50.008559mg
Operating Temperature	0°C~70°C
Packaging	Tape & Reel (TR)
Published	2011
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
Additional Feature	ALSO OPERATES WITH 2.25V TO 2.75V SUPPLY
Voltage - Supply	2.3V~3.6V
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	3.3V
Reach Compliance Code	unknown
Base Part Number	SL23EP08
Output	LVCMOS
Pin Count	16
Number of Outputs	8
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	3.63V
Supply Voltage-Min (Vsup)	2.97V
Number of Circuits	1
Frequency (Max)	220MHz
Family	S
Input	Clock
Ratio - Input:Output	1:9
PLL	Yes with Bypass
Differential - Input:Output	No/No
Divider/Multiplier	Yes/Yes
fmax-Min	220 MHz
Same Edge Skew-Max (tskwd)	0.3 ns
RoHS Status	RoHS Compliant