CDCEL913IPWRQ1 Overview
A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. There is a clock generator embedded in the 14-TSSOP (0.173, 4.40mm Width) package. This clock generator will sustain a maximum temperature of 260 when reflown. There are 14 terminations found in the file. The clock generator ic should be grounded with a voltage of 1.8V. This clock generator receives its inputs from LVCMOS, Crystal, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 230MHz Max can be achieved with this clock-based frequency synthesizer. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. As long as there are 1.7V~1.9V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. It's compatible with LVCMOS logic levels. As far as electrical parts go, this component can be classified as a PLL Clock Synthesizer component. There is a 14-bit clock-generating IC built specifically for microprocessors in this frequency generator. These related electrical parts are available for the base part number CDCEL913. PLL is designed with 14 pins. The supply voltage should be maintained at 1.8V for high efficiency. This clock generator is a member of Automotive, AEC-Q100 series. The output frequency can be amplified as high as possible with its 3 signal outputs.
CDCEL913IPWRQ1 Features
Available in the 14-TSSOP (0.173, 4.40mm Width)
Supply voltage of 1.8V
Operating supply voltage of 1.8V

CDCEL913IPWRQ1 Applications
There are a lot of Texas Instruments
CDCEL913IPWRQ1 Clock Generators applications.

Wireless infrastructure
Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet

Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Factory Lead Time	6 Weeks
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Type	PLL Clock Synthesizer
Voltage - Supply	1.7V~1.9V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	1.8V
Base Part Number	CDCEL913
Output	LVCMOS
Pin Count	14
Number of Outputs	3
Operating Supply Voltage	1.8V
Number of Circuits	1
Frequency (Max)	230MHz
Input	LVCMOS, Crystal
Ratio - Input:Output	1:3
Primary Clock/Crystal Frequency-Nom	32MHz
PLL	Yes with Bypass
Differential - Input:Output	No/No
Divider/Multiplier	Yes/Yes
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free