CY7B9910-5SXC Overview
Tube-method packaging is used for clock ICs. The 24-SOIC (0.295, 7.50mm Width) package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 24 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 5V. The input of this clock generator is designed to be Clock. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 80MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. As far as the supply voltage is concerned, clock PLL can be used with 4.5V~5.5V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. As the name suggests, this is a clock generator that is compatible with TTL logic levels. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 24-bit device designed specifically for microprocessors. You can find related electrical components to the base part number CY7B9910. It is possible to connect to the frequency generators via 24 pins. There is a maximum supply voltage of 5V that clock generator can handle. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.5 ns Max, this clock generator offers low timing skew. When searching for parts of the 7B family, similar frequency generators will be found.
CY7B9910-5SXC Features
Available in the 24-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V
Operating supply voltage of 5V

CY7B9910-5SXC Applications
There are a lot of Cypress Semiconductor Corp
CY7B9910-5SXC Clock Generators applications.

Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SOIC (0.295, 7.50mm Width)
Number of Pins	24
Operating Temperature	0°C~70°C
Packaging	Tube
Published	2007
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	24
Type	Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish	Matte Tin (Sn)
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	CY7B9910
Output	TTL
Pin Count	24
Number of Outputs	8
Operating Supply Voltage	5V
Power Supplies	5V
Number of Circuits	1
Nominal Supply Current	85mA
Power Dissipation	78mW
Frequency (Max)	80MHz
Family	7B
Input	Clock
Ratio - Input:Output	1:8
Max I(ol)	0.046 A
PLL	Yes
Differential - Input:Output	No/No
Prop. Delay@Nom-Sup	0.5 ns
Propagation Delay (tpd)	0.5 ns
Same Edge Skew-Max (tskwd)	0.5 ns
Duty Cycle	50 %
Height Seated (Max)	2.667mm
Width	7.5057mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free