CY22393FXI Overview
As a clock IC, it is packaged by the Tube method. The 16-TSSOP (0.173, 4.40mm Width) package embeds this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. As you can see, it consists of 16 terminations. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called LVTTL, Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 3.135V~3.465V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator, Fanout Distribution component. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number CY22393 are listed below. There are 16 pins that are available on the clock PLL. RF synthesizers can handle a voltage of 3.3V as the supply voltage. The output frequency can be magnified as high as possible with the assistance of 6 signal outputs. High efficiency is achieved when operating at a frequency of 166MHz. For its full function, a supply current of 100mA is required. I have designed a clock PLL with 3 elements and low jitter performance.
CY22393FXI Features
Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY22393FXI Applications
There are a lot of Cypress Semiconductor Corp
CY22393FXI Clock Generators applications.

Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment

Factory Lead Time	6 Weeks
Contact Plating	Gold, Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Weight	172.98879mg
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2004
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	16
ECCN Code	EAR99
Type	Clock Generator, Fanout Distribution
Terminal Finish	Matte Tin (Sn)
Voltage - Supply	3.135V~3.465V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	3.3V
Frequency	166MHz
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	CY22393
Output	CMOS
Pin Count	16
Number of Outputs	6
Operating Supply Voltage	3.3V
Number of Elements	3
Number of Circuits	1
Operating Supply Current	100mA
Nominal Supply Current	100mA
Input	LVTTL, Crystal
Ratio - Input:Output	1:6
Primary Clock/Crystal Frequency-Nom	166MHz
PLL	Yes with Bypass
Differential - Input:Output	No/No
Max Duty Cycle	55 %
Divider/Multiplier	Yes/No
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free