CY22394FXC OverviewThe Tube method is used for packaging clock ICs. As part of the 16-TSSOP (0.173, 4.40mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 16 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVTTL, Crystal is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 200MHz 400MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. In terms of supply voltage, RF synthesizer works with 3.135V~3.465V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of CMOS, PECL logic. It has been classified as a Clock Generator, Fanout Distribution electronic part, which means that it is a semiconductor. It is a 16-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CY22394. There are 16 pins on the frequency generators that are available for use. Supply voltage 3.3V is what clock generator can handle. 5 signal outputs are provided for enhancing output frequency as much as possible. Using a frequency of 400MHz allows frequency synthesizer to achieve high efficiencies. The clock PLL here has 3 elements and has a very low jitter performance.
CY22394FXC FeaturesAvailable in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY22394FXC ApplicationsThere are a lot of Cypress Semiconductor Corp
CY22394FXC Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Clock Generator, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Voltage - Supply | 3.135V~3.465V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY22394 |
| Output | CMOS, PECL |
| Pin Count | 16 |
| Number of Outputs | 5 |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 3 |
| Number of Circuits | 1 |
| Nominal Supply Current | 100mA |
| Frequency (Max) | 200MHz 400MHz |
| Input | LVTTL, Crystal |
| Ratio - Input:Output | 1:5 |
| Primary Clock/Crystal Frequency-Nom | 166MHz |
| PLL | Yes with Bypass |
| Differential - Input:Output | No/Yes |
| Divider/Multiplier | Yes/No |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867