CY7B993V-2AXIT OverviewThe Tape & Reel (TR) method is used for packaging clock ICs. As part of the 100-LQFP package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 100 terminations found in this file. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVPECL, LVTTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 100MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. 3.63V would be the maximum supply voltage for this clock generator. In order to maintain safety, this frequency generator should be supplied with voltages above 2.97V. In terms of supply voltage, RF synthesizer works with 2.97V~3.63V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of LVTTL logic. It has been classified as a Clock Buffer, Fanout Distribution electronic part, which means that it is a semiconductor. It is a 100-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CY7B993. There is a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature on this frequency generator in order to produce a better clock signal. RoboClock™ series electronic parts are used in this part. Low timing skew is offered by this RF synthesizer at maximum 0.25 ns. By searching for parts that belong to the 7B family, you can find electronic parts that are similar.
CY7B993V-2AXIT FeaturesAvailable in the 100-LQFP
Supply voltage of 3.3V
CY7B993V-2AXIT ApplicationsThere are a lot of Cypress Semiconductor Corp
CY7B993V-2AXIT Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | RoboClock™ |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY7B993 |
| Output | LVTTL |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Frequency (Max) | 100MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Propagation Delay (tpd) | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.25 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867