PLL1700E OverviewThe Tube method is used for packaging clock ICs. As part of the 20-SSOP (0.209, 5.30mm Width) package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 20 terminations found in this file. To operate this time clock generator, 5V voltage should be applied. In this clock generator, TTL is used as the input to the clock. For a full understanding of the electronic part's performance, 1 circuits are implemented. An up to 36.87MHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. In terms of supply voltage, RF synthesizer works with 3.3V 5V. Test statistics estimate a temperature of -25°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of CMOS logic. It has been classified as a PLL Multi-Clock Generator electronic part, which means that it is a semiconductor. It is a 20-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number PLL1700. There are 20 pins on the frequency generators that are available for use. Supply voltage 5V is what clock generator can handle. There is a ALSO REQUIRES 3.3V SUPPLY feature on this frequency generator in order to produce a better clock signal. 6 signal outputs are provided for enhancing output frequency as much as possible. Using a frequency of 27MHz allows frequency synthesizer to achieve high efficiencies. The clock PLL here has 2 elements and has a very low jitter performance. During these clock generator operations, the maximum current supplied reaches 16mA.
PLL1700E FeaturesAvailable in the 20-SSOP (0.209, 5.30mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
PLL1700E ApplicationsThere are a lot of Texas Instruments
PLL1700E Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 189.913455mg |
| Operating Temperature | -25°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | PLL Multi-Clock Generator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO REQUIRES 3.3V SUPPLY |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 27MHz |
| Base Part Number | PLL1700 |
| Output | CMOS |
| Pin Count | 20 |
| Number of Outputs | 6 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Circuits | 1 |
| Nominal Supply Current | 16mA |
| Max Supply Current | 16mA |
| Frequency (Max) | 36.87MHz |
| Input | TTL |
| Ratio - Input:Output | 1:6 |
| Primary Clock/Crystal Frequency-Nom | 27MHz |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Divider/Multiplier | No/No |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867