CY7B994V-5BBCT OverviewThis clock IC is packaged using the Tape & Reel (TR) method. The 100-LBGA package includes this clock generator. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 220. In it, there are 100 terminations to be found. This time clock generator should be voltaged at 3.3V. A clock generator's input is called LVPECL, LVTTL and it is designed as the input for this clock generator. For full access to the electronic component's capabilities, 1 circuits are implemented. A clock-based RF synthesizer that provides a max frequency of 200MHz is available. With the Surface Mount, it is easy to install this electric component on the panel. Clock generators can take up to 3.63V of power as a maximum supply voltageThis frequency synthesizer requires a supply voltage above 2.97V to be safe. This clock PLL works with a supply voltage of 2.97V~3.63V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. A frequency synthesizer which is compatible with the LVTTL logic levels is presented here. A Clock Buffer, Fanout Distribution is a classification for the electronic part in question. Microprocessors are specifically designed to use this clock-generating IC, which has a 100-bit output. This part number CY7B994 is related to the following electrical components. PF synthesizers is equipped with 100 pins. PLL clock can handle a voltage of 3.3V as its supply voltage. The frequency generator has a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature to improve the output of clock signals. There are a number of electronic parts in the RoboClock™ series, including this one. Clock PLL has 18 signal outputs to maximi18e output frequency. There is a low timing skew at 0.8 nsmax with this RF synthesizer. A search for the 7B family will yield similar electronic components.
CY7B994V-5BBCT FeaturesAvailable in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5BBCT ApplicationsThere are a lot of Cypress Semiconductor Corp
CY7B994V-5BBCT Clock Generators applications.
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | RoboClock™ |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Propagation Delay | 200 ps |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
CY7B994V-5BBCT Datasheet
+8613715157867