CY7B994V-5BBXI OverviewIn order to package it as a clock IC, the Tray package is used. A Clock PLL is included with the 100-LBGA package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 100 terminations. Clock generator ics require a voltage of 3.3V. As the Clock PLL's input, LVPECL, LVTTL is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. It provides a maximum frequency of 200MHz. Surface Mount-slots make it easy to mount this electronic component on panels. It would take a maximum supply voltage of 3.63V to operate this time clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.97V. Clock generator ic works with 2.97V~3.63V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. LVTTL logic levels are supported by this RF synthesizer. Clock Buffer, Fanout Distribution is the type of electrical part that this component is classified as. It is a 100-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CY7B994. The clock PLL has 100 pins that are available. In terms of the supply voltage, PLL clock can handle 3.3V volts. This frequency synthesizer features CONFIGURABLE AS SINGLE ENDED TTL ALSO to produce better clock signals. RoboClock™ series electronic parts are included in this product. The frequency synthesizer features 18 signal outputs to ensure as high a frequency as possible. As a result of this digital clock generator, there is a low timing skew at 0.8 ns max. By searching for the 7B family, it is possible to find similar electrical components.
CY7B994V-5BBXI FeaturesAvailable in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5BBXI ApplicationsThere are a lot of Cypress Semiconductor Corp
CY7B994V-5BBXI Clock Generators applications.
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment
Multi-function printers
Media broadcast servers
Test equipment
| Factory Lead Time | 6 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Series | RoboClock™ |
| Published | 2003 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B994V-5BBXI Datasheet
+8613715157867