DC-EM-02T-S-25 Overview
A MPU Core module or board is used in the microcontroller.It has ARM7TDMI, NS7520 cores and is driven by a processor.Microcontrollers are configured by default to -40°C~85°C.MCU chips flash size is 4MB.RJ45' stands for connector type.This MCUs belongs to the Digi Connect EM® Series of MCUs.A minimum RAM size of 8MB is set to enable the software to run normally.55MHz frequency can still be used accurately.A ARM architecture underpins micro controller's core.Powered by 3.3V volts, this microcontrollers operates on DC DC power.A value of FLASH, NOR, SDRAM has been selected for data storage.There is a setting of 270mA for the supply current of the MCUs.
DC-EM-02T-S-25 Features
Core processor of ARM7TDMI, NS7520
Flash size of 4MB
Core architecture of ARM

DC-EM-02T-S-25 Applications
There are a lot of Digi
DC-EM-02T-S-25 Microcontroller, Microprocessor, FPGA Modules applications.

Test and Measurement
Medical Devices
Data Acquisition
Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface

Factory Lead Time	11 Weeks
Operating Temperature	-40°C~85°C
Series	Digi Connect EM®
Published	2010
Size / Dimension	1.94 x 1.58 49.2mmx40.0mm
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Connector Type	RJ45
Frequency	55MHz
Operating Supply Voltage	3.3V
Interface	Ethernet, Serial
Operating Supply Current	270mA
RAM Size	8MB
Memory Type	FLASH, NOR, SDRAM
Core Processor	ARM7TDMI, NS7520
Data Rate	230 kbps
Density	30.5 Mb
Core Architecture	ARM
Power Consumption	891mW
Module/Board Type	MPU Core
Flash Size	4MB
Height	15.6mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free