DC-ME-01T-PC-50 Overview
A MPU Core-type board or module is used in this microcontroller.Processors with ARM7TDMI, NS7520 cores drive it.The microcontroller is set to -40°C~85°C by default, which is the default setting.Flash size on this MCU electronics is 2MB.Microprocessor chip is a type RJ45 connector.In the Digi Connect ME® series, this is one of the microcontrollers.The RAM size has been reduced to 8MB in order to ensure that the software runs normally.A 55MHz-speed motor drives the MCU chip.At a frequency of 55MHz, MCU chip can continue to function accurately.Package Module is included.Microprocessor chip is currently operating at 85°C°C, which is the maximum operational temperature.The temperature should be warmer than -40°C while microprocessor is operating.The architecture it uses at micro controller's core is ARM.An operating voltage of 3.45V volts is required to run this microcontrollers.In order to operate, microcontroller must have a maximum output current of 270mA.
DC-ME-01T-PC-50 Features
Core processor of ARM7TDMI, NS7520
Flash size of 2MB
Speed of 55MHz
Core architecture of ARM

DC-ME-01T-PC-50 Applications
There are a lot of Digi
DC-ME-01T-PC-50 Microcontroller, Microprocessor, FPGA Modules applications.

Medical Devices
Data Acquisition
Industrial Control
Process Control
Process Monitoring
Healthcare Monitoring
Patient Monitoring
IoT Secure Gateways
Human Machine Interface
Human Machine Control Panel

Factory Lead Time	3 Weeks
Package / Case	Module
Operating Temperature	-40°C~85°C
Series	Digi Connect ME®
Published	2008
Size / Dimension	1.45 x 0.75 36.7mmx19.1mm
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Connector Type	RJ45
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Frequency	55MHz
Max Output Current	270mA
Operating Supply Voltage	3.45V
Interface	Serial
Speed	55MHz
RAM Size	8MB
Core Processor	ARM7TDMI, NS7520
Data Rate	100 Mbps
Core Architecture	ARM
Module/Board Type	MPU Core
Flash Size	2MB
RoHS Status	RoHS Compliant
Lead Free	Lead Free