DS1010-400 Overview
For cost-effective packaging, Tube is used. By using the 14-DIP (0.300, 7.62mm) package, applications are no longer required to use additional insulating hardware. In order to ensure reliable performance, 5V is supplied with a voltage. As its mounting method, Through Hole is used. Taps and steps are configured with 10. At DUAL, the terminals are located. For a unique configuration, it is equipped with 14 terminations. When operating, 5V receives a supply voltage. It uses the logic type SILICON DELAY LINE. A minimum supply voltage of 4.75V is acceptable for its operation. Providing a maximum supply voltage of 5.25V is acceptable.
DS1010-400 Features
Supply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits

DS1010-400 Applications
There are a lot of Rochester Electronics, LLC
DS1010-400 Delay Lines Timing ICs applications.

Switch Debouncing
High Vibration, High Acceleration Environments
Portable and Battery-Powered Equipment
Clock Synchronization
Digital Systems
Embedded Systems
Utility Meters
Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems

Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Surface Mount	NO
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Terminal Finish	TIN LEAD
Voltage - Supply	5V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Supply Voltage	5V
Terminal Pitch	2.54mm
Time@Peak Reflow Temperature-Max (s)	20
JESD-30 Code	R-PDIP-T14
Function	Tapped
Qualification Status	COMMERCIAL
Operating Temperature (Max)	70°C
Supply Voltage-Max (Vsup)	5.25V
Temperature Grade	COMMERCIAL
Supply Voltage-Min (Vsup)	4.75V
Output Polarity	TRUE
Logic IC Type	SILICON DELAY LINE
Number of Taps/Steps	10
Delay to 1st Tap	40ns
Programmable Delay Line	NO
Available Total Delays	400ns
Total Delay-Nom (td)	400 ns
Input Frequency-Max (fmax)	1.5625MHz
Length	19.05mm
Height Seated (Max)	4.572mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant