DS1013M-35 OverviewIn order to ensure cost-effectiveness, it is packaged using Tube. With the 8-DIP (0.300, 7.62mm) package, additional insulation hardware is no longer required. A reliable performance can be achieved with the supply voltage of 4.75V~5.25V. As a mounting technique, Through Hole has been used. This device has an operating temperature of 0°C~70°C. 1 taps/steps are configured. Several parts with the same base part number DS1013 are universally preferred for a variety of applications. The device is placed at the location of the terminals at DUAL. Several terminations are provided for unique configurations, including a 8 termination. An operating voltage of 5V is applied to the device when it is in operation. It uses SILICON DELAY LINE as a logic type. A supply voltage of 4.75V is sufficient for it to operate. It is acceptable to run it at the maximum voltage of 5.25V. It is mounted in the way of Through Hole. In order to ensure flexible operation, 5V is equipped with power supplies. As part of the CMOS family, there are several active components. As a result of its large BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT and other specific characteristics, it is well suited for use in a variety of applications.
DS1013M-35 FeaturesSupply voltage at Tube volts
operate supply current at 5V
with SILICON DELAY LINE bits
supply type: 5V
stay resistance at CMOS
DS1013M-35 ApplicationsThere are a lot of Maxim Integrated
DS1013M-35 Delay Lines Timing ICs applications.
Security Systems
Network Hubs, Bridges, and Routers
QDR/QDRII Memory Systems
Multiphase Clock Generation
LCD Televisions
Telecommunications
Digital Test Equipment
Digital Video Projection
Signal Generators and Analyzers
Clock De-Skewing
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | BOTH LEADING & TRAILING EDGE ACCURACY; MAX FAN OUT OF 10 74LS LOAD PER OUTPUT |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DS1013 |
| JESD-30 Code | R-PDIP-T8 |
| Function | Multiple, NonProgrammable |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Family | CMOS |
| Output Polarity | TRUE |
| Logic IC Type | SILICON DELAY LINE |
| Power Supply Current-Max (ICC) | 70mA |
| Number of Taps/Steps | 1 |
| Number of Independent Delays | 3 |
| Delay to 1st Tap | 35ns |
| Programmable Delay Line | NO |
| Total Delay-Nom (td) | 35 ns |
| Height Seated (Max) | 4.572mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
DS1013M-35 Datasheet
+8613715157867