DS92LV222ATMX/NOPB Overview
To make transportation easier, the power buffer is packaged in a 16-SOIC (0.154, 3.90mm Width).Packaged in Tape & Reel (TR) and ready for power buffer.An easy-to-adapt universal mount.A Buffer, Multiplexer is a typical type.For its operation, this op amp buffer uses a voltage of 3V~3.6V.It is important for 1 x 2:2 channels to work together to ensure quality output.This facilitates LVDS input.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.Application-specific operational amplifier buffers such as this one are targeted at LVDS and other markets.For more pin-to-pin solutions, try "DS92LV222".As a result, it outputs in LVDS.The 16 pins are on it.There are 25mA op amp buffers in it.A Surface Mount hole is available for mounting it on a PCB or another board.In order for this power buffer to operate, a voltage of 45mA must be applied.It is necessary to supply voltage 3.3V for normal operation.2 elements are used to interface with this repeater signal.A 2 receiver is implemented in this repeater signal.It does not work well at temperatures below -40°C.Higher temperatures than 85°C are not recommended.The video signal spliter contains 2 drivers.
DS92LV222ATMX/NOPB Features
1 x 2:2 channels.
Mainly used in LVDS.

DS92LV222ATMX/NOPB Applications
There are a lot of Texas Instruments
DS92LV222ATMX/NOPB Signal Buffers, Repeaters, Splitters applications.

Digital Crossconnects
Network Switches/Routers
Backplane Interconnect
Clock Distribution
Protection Switching
Loopback
Clock Distribution
Servers
Industrial PCs
Test Equipment

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Supplier Device Package	16-SOIC
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Type	Buffer, Multiplexer
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Applications	LVDS
Voltage - Supply	3V~3.6V
Base Part Number	DS92LV222
Output	LVDS
Operating Supply Voltage	3.3V
Number of Elements	2
Number of Channels	1 x 2:2
Operating Supply Current	45mA
Power Dissipation	970mW
Propagation Delay	13 ns
Current - Supply	25mA
Input	LVDS
Number of Drivers	2
Data Rate (Max)	100Mbps
Number of Receivers	2
Delay Time	8.0ns
Capacitance - Input	5pF
RoHS Status	ROHS3 Compliant