FIN1102MTC Overview
To make transportation easier, the power buffer is packaged in a 14-TSSOP (0.173, 4.40mm Width).Packaged in Tube and ready for power buffer.An easy-to-adapt universal mount.A Buffer, ReDriver is a typical type.For its operation, this op amp buffer uses a voltage of 3V~3.6V.It is important for 2 channels to work together to ensure quality output.This facilitates LVDS, LVPECL input.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.Application-specific operational amplifier buffers such as this one are targeted at LVDS and other markets.For more pin-to-pin solutions, try "FIN1102".As a result, it outputs in LVDS.The 14 pins are on it.There are 23mA op amp buffers in it.A Surface Mount hole is available for mounting it on a PCB or another board.In order for this power buffer to operate, a voltage of 23mA must be applied.It is necessary to supply voltage 3.3V for normal operation.The splitter should operate at 23mA nominal supply current under normal circumstances.2 elements are used to interface with this repeater signal.A 2 receiver is implemented in this repeater signal.It does not work well at temperatures below -65°C.Higher temperatures than 150°C are not recommended.The video signal spliter contains 2 drivers.
FIN1102MTC Features
2 channels.
Mainly used in LVDS.

FIN1102MTC Applications
There are a lot of ON Semiconductor
FIN1102MTC Signal Buffers, Repeaters, Splitters applications.

Digital Crossconnects
Network Switches/Routers
Backplane Interconnect
Clock Distribution
Protection Switching
Loopback
Clock Distribution
Servers
Industrial PCs
Test Equipment

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Supplier Device Package	14-TSSOP
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2002
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Type	Buffer, ReDriver
Max Operating Temperature	150°C
Min Operating Temperature	-65°C
Applications	LVDS
Voltage - Supply	3V~3.6V
Base Part Number	FIN1102
Output	LVDS
Operating Supply Voltage	3.3V
Number of Elements	2
Number of Channels	2
Max Supply Voltage	3.6V
Min Supply Voltage	3V
Operating Supply Current	23mA
Nominal Supply Current	23mA
Propagation Delay	1.75 ns
Turn On Delay Time	1.75 ns
Current - Supply	23mA
Input	LVDS, LVPECL
Number of Drivers	2
Data Rate (Max)	800Mbps
Number of Receivers	2
Delay Time	1.75ns
Capacitance - Input	2.5pF
RoHS Status	RoHS Compliant
Lead Free	Lead Free