INA154UA OverviewThe linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. This is a Differential type op amp. Linear amplifier is delivered in a Tube case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. Please take in mind that this instrumentation amplifier should be run at 15V. The buffer op amp includes 8 pins. Regarding input offset voltage, op amp rates 1.5mV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 2.4mA. Voltage gain should remain at 0dB. There are 1 circuits on this op amp. The op amp ic has 2 channels on it. Buffer amplifier has a quiescent current of 2.4mA. Instrumentation amplifier resistance should remain within the range of 50kOhm. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
INA154UA Features8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 50kOhm
INA154UA ApplicationsThere are a lot of Texas Instruments
INA154UA Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 50kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA154 |
| Pin Count | 8 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 2.4mA |
| Nominal Supply Current | 2.9mA |
| Quiescent Current | 2.4mA |
| Min Input Voltage | 5V |
| Slew Rate | 14V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 74 dB |
| Max Input Voltage | -5V |
| Voltage - Supply, Single/Dual (±) | 8V~36V ±4V~18V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 3.1MHz |
| Voltage Gain | 0dB |
| Voltage - Input Offset | 100μV |
| Dual Supply Voltage | 15V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |