INA159AIDGKT OverviewPackaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Differential-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 500μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 1.1mA , this buffer op amp will be able to operate. Keeping the voltage gain at 13.98dB is the best course of action. The buffer amp consists of 1 circuits in total. 2 channels are available on the instrumentation amplifier. As a result, linear amplifier's quiescent current is 1.1mA. It is recommended to keep the buffer amps resistance within the range of 240kOhm. An analog IC that is also used in this instrumentation amplifier is referred to as the ANALOG CIRCUIT type.
INA159AIDGKT Features8 Pins
supply voltage of 5V
13.98dB voltage gain
Resistance of 240kOhm
INA159AIDGKT ApplicationsThere are a lot of Texas Instruments
INA159AIDGKT Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 26.506804mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 240kOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | INA159 |
| Pin Count | 8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.1mA |
| Nominal Supply Current | 1.1mA |
| Quiescent Current | 1.1mA |
| Slew Rate | 15V/μs |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Output Current per Channel | 60mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 1.5MHz |
| Voltage Gain | 13.98dB |
| Power Supply Rejection Ratio (PSRR) | 93.98dB |
| Voltage - Input Offset | 100μV |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
INA159AIDGKT Datasheet
+8613715157867