LM741H/NOPB OverviewIt is packaged in an TO-99-8 Metal Can-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Bulk case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 1mV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -55°C~125°C. A supply current of 1.7mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 106.02dB. There are 1 elements in this buffer amplifier.
LM741H/NOPB Features8 Pins
supply voltage of 15V
106.02dB voltage gain
LM741H/NOPB ApplicationsThere are a lot of Texas Instruments
LM741H/NOPB Instrumentational OP Amps applications.
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-99-8 Metal Can |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Bulk |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Max Power Dissipation | 500mW |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | LM741 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 1.7mA |
| Nominal Supply Current | 1.7mA |
| Power Dissipation | 500mW |
| Output Current | 25mA |
| Slew Rate | 0.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 80nA |
| Voltage - Supply, Single/Dual (±) | 10V~44V ±5V~22V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 1.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 437 kHz |
| Voltage Gain | 106.02dB |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.2μA |
| Height | 5.72mm |
| Length | 9.08mm |
| Width | 9.08mm |
| Thickness | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LM741H/NOPB Datasheet
+8613715157867