INA2126UA OverviewOp amp is packaged in 16-SOIC (0.154, 3.90mm Width) case. Op amps are Instrumentation types of amplifier on the chip. Instrumentation amplifier is delivered in a Tube case. The number of terminations approaches 16. Linear amplifier has a total of 16 pins. Please take in mind that op amp should be run at 15V. Linear amplifier includes 16 pins. Regarding input offset voltage, buffer amplifier rates 500μV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~85°C. Operational amplifier can operate supply current at 175μA. The voltage gain should stay at 80dB. Instrumentation amplifier has 2 channels on it. Op amp has total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 28V voltage. Linear amplifier has a quiescent current of 175μA. Op amp resistance should stay within the range of 1GOhm.
INA2126UA Features16 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm
INA2126UA ApplicationsThere are a lot of Texas Instruments
INA2126UA Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 1GOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Base Part Number | INA2126 |
| Pin Count | 16 |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Number of Channels | 2 |
| Operating Supply Current | 175μA |
| Nominal Supply Current | 175μA |
| Max Supply Current | 400μA |
| Quiescent Current | 175μA |
| Slew Rate | 0.4V/μs |
| Amplifier Type | Instrumentation |
| Common Mode Rejection Ratio | 74 dB |
| Current - Input Bias | 10nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~36V ±1.35V~18V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 9 kHz |
| Gain Bandwidth Product | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 80dB |
| Power Supply Rejection Ratio (PSRR) | 106dB |
| Supply Voltage Limit-Max | 18V |
| Voltage - Input Offset | 150μV |
| -3db Bandwidth | 0.2MHz |
| Dual Supply Voltage | 15V |
| Input Offset Current-Max (IIO) | 0.005μA |
| Input Voltage Noise Density | 35nV/sqrt Hz |
| Voltage Gain-Nom | 100 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867