INA2132UA/2K5 Overview
The linear amplifier is packaged in a 14-SOIC (0.154, 3.90mm Width) case. This is a Instrumentation type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 15V. The buffer op amp includes 14 pins. Regarding input offset voltage, op amp rates 750μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 160μA. Voltage gain should remain at 0dB. There are 1 circuits on this op amp. The op amp ic has 2 channels on it. TR is adopted to pack the instrumentation amplifier. Buffer amplifier has a quiescent current of 160μA. Instrumentation amplifier resistance should remain within the range of 80kOhm.
INA2132UA/2K5 Features
14 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 80kOhm

INA2132UA/2K5 Applications
There are a lot of Texas Instruments
INA2132UA/2K5 Instrumentational OP Amps applications.

Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits

Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	14
Weight	129.387224mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	14
ECCN Code	EAR99
Resistance	80kOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Packing Method	TR
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Base Part Number	INA2132
Pin Count	14
Number of Channels	2
Number of Circuits	1
Operating Supply Current	160μA
Nominal Supply Current	370μA
Quiescent Current	160μA
Slew Rate	0.1V/μs
Architecture	VOLTAGE-FEEDBACK
Amplifier Type	Instrumentation
Common Mode Rejection Ratio	74 dB
Max Input Voltage	-2V
Voltage - Supply, Single/Dual (±)	2.7V~36V ±1.35V~18V
Output Current per Channel	12mA
Input Offset Voltage (Vos)	750μV
Bandwidth	300 kHz
Neg Supply Voltage-Nom (Vsup)	-15V
Unity Gain BW-Nom	300 kHz
Voltage Gain	0dB
Low-Offset	YES
Frequency Compensation	YES
Voltage - Input Offset	75μV
Micropower	YES
Programmable Power	NO
Power	NO
Voltage Gain-Nom	1
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free