LMK03200ISQ/NOPB OverviewTape & Reel (TR)-method packaging is used for clock ICs. The 48-WFQFN Exposed Pad package contains this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 48 terminations that can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 3.3V. The input of this clock generator is designed to be LVCMOS, LVDS, LVPECL. To access the full performance of the electronic component, 1 circuits are implemented. There is a maximum frequency of 1.296GHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can be conveniently installed on the panel. This clock generator would require a maximum supply voltage of 3.45V. As far as the supply voltage is concerned, clock PLL can be used with 3.15V~3.45V. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with LVDS, LVPECL logic levels. This electronic component is usually classified as a Clock Conditioner component. The clock-generating IC is a 48-bit device designed specifically for microprocessors. You can find related electrical components to the base part number LMK03200. It is possible to connect to the frequency generators via 48 pins. 9 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.03 ns Max, this clock generator offers low timing skew. This clock generator ic is ideally suited to the TR package.
LMK03200ISQ/NOPB FeaturesAvailable in the 48-WFQFN Exposed Pad
Supply voltage of 3.3V
LMK03200ISQ/NOPB ApplicationsThere are a lot of Texas Instruments
LMK03200ISQ/NOPB Clock Generators applications.
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-WFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Type | Clock Conditioner |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TR |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LMK03200 |
| Output | LVDS, LVPECL |
| Pin Count | 48 |
| Number of Outputs | 9 |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Number of Circuits | 1 |
| Frequency (Max) | 1.296GHz |
| Input | LVCMOS, LVDS, LVPECL |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.0005 A |
| PLL | No |
| Differential - Input:Output | Yes/Yes |
| Divider/Multiplier | Yes/No |
| Same Edge Skew-Max (tskwd) | 0.03 ns |
| Height | 800μm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867