LMV931MGX/NOPB Overview
It is packaged in an 5-TSSOP, SC-70-5, SOT-353-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 5 terminations this year. A total of 5 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.7V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 5 pins. Op amp ic rates 4mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 116μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 113dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. An buffer amplifier is packed in a TR-shape according to the design.
LMV931MGX/NOPB Features
5 Pins
supply voltage of 2.7V
113dB voltage gain
Output Type: Rail-to-Rail

LMV931MGX/NOPB Applications
There are a lot of Texas Instruments
LMV931MGX/NOPB Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Package / Case	5-TSSOP, SC-70-5, SOT-353
Number of Pins	8
Number of Pins	5
Operating Temperature	-40°C~85°C
Operating Temperature	-40°C~125°C
Packaging	Tube
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Feature	Alarm, Leap Year, Square Wave Output
Pbfree Code	yes
Part Status	Active
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Number of Terminations	5
Type	Clock/Calendar
Packing Method	TR
Voltage - Supply	1.8V~5.5V
Terminal Position	DUAL
Terminal Position	DUAL
Terminal Form	GULL WING
Supply Voltage	3V
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Number of Functions	1
Base Part Number	DS1342
Supply Voltage	2.7V
Pin Count	8
Base Part Number	LMV931
Power Supplies	2/5V
Interface	I2C, 2-Wire Serial
Clock Frequency	0.032MHz
Pin Count	5
Logic Function	Clock
Output Type	Rail-to-Rail
Number of Timers	1
Operating Supply Voltage	3V
Time Format	HH:MM:SS (12/24 hr)
Number of Elements	1
Date Format	YY-MM-DD-dd
Operating Supply Current	116μA
Current - Timekeeping (Max)	0.6μA~0.7μA @ 3V~5V
Nominal Supply Current	103μA
Time-Min	SECONDS
Output Current	8mA
Interrupt Capability	Y
Slew Rate	0.42V/μs
Volatile	YES
Architecture	VOLTAGE-FEEDBACK
Information Access Method	I2C
Amplifier Type	General Purpose
Length	3mm
Common Mode Rejection Ratio	50 dB
Height Seated (Max)	1.1mm
Current - Input Bias	14nA
Width	3mm
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±0.9V~2.75V
REACH SVHC	Unknown
Output Current per Channel	100mA
Radiation Hardening	No
Input Offset Voltage (Vos)	4mV
RoHS Status	ROHS3 Compliant
Bandwidth	1.4MHz
Gain Bandwidth Product	1.5MHz
Unity Gain BW-Nom	1500 kHz
Voltage Gain	113dB
Power Supply Rejection Ratio (PSRR)	70dB
Low-Offset	NO
Frequency Compensation	YES
Voltage - Input Offset	1mV
Low-Bias	NO
Micropower	YES
Programmable Power	NO
Height	1.1mm
Length	2mm
Width	1.25mm
Thickness	900μm
Lead Free	Lead Free