LTC1992-2HMS8#PBF Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 250μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 700μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 80dB. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs Differential, Rail-to-Rail signals. It is important that the op amp resistance stays within the range of 38kOhm.
LTC1992-2HMS8#PBF Features
8 Pins
supply voltage of 5V
80dB voltage gain
Output Type: Differential, Rail-to-Rail
Resistance of 38kOhm

LTC1992-2HMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices
LTC1992-2HMS8#PBF Instrumentational OP Amps applications.

Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering

Lifecycle Status	PRODUCTION (Last Updated: 1 week ago)
Factory Lead Time	8 Weeks
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	8
Operating Temperature	-40°C~125°C
Packaging	Tube
Published	2011
JESD-609 Code	e3
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	38kOhm
Terminal Finish	Matte Tin (Sn)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	LTC1992
Pin Count	8
Output Type	Differential, Rail-to-Rail
Power Supplies	5V
Number of Channels	1
Operating Supply Current	700μA
Slew Rate	1.5V/μs
Amplifier Type	Differential
Common Mode Rejection Ratio	55 dB
Current - Input Bias	2pA
Voltage - Supply, Single/Dual (±)	2.7V~11V ±1.35V~5.5V
Output Current per Channel	30mA
Input Offset Voltage (Vos)	250μV
Bandwidth	3.5MHz
Gain Bandwidth Product	3.2MHz
Unity Gain BW-Nom	4000 kHz
Voltage Gain	80dB
Average Bias Current-Max (IIB)	0.000002μA
Power Supply Rejection Ratio (PSRR)	72dB
Nominal Gain Bandwidth Product	4MHz
Length	3mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free