LT1498IS8#TRPBF OverviewPackaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 150μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 1.8mA , this buffer op amp will be able to operate. Keeping the voltage gain at 131.6dB is the best course of action. The buffer amp consists of 2 circuits in total. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A total of 2 elements are present in this linear amplifier. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. The C-Load™ stands for the buffer op amp's serial number.
LT1498IS8#TRPBF Features8 Pins
supply voltage of 15V
131.6dB voltage gain
Output Type: Rail-to-Rail
LT1498IS8#TRPBF ApplicationsThere are a lot of Linear Technology/Analog Devices
LT1498IS8#TRPBF Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | C-Load™ |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1498 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5/+-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 1.8mA |
| Supply Current-Max | 6mA |
| Slew Rate | 6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 81 dB |
| Current - Input Bias | 250nA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.1V~18V |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 150μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 8500 kHz |
| Voltage Gain | 131.6dB |
| Average Bias Current-Max (IIB) | 1.05μA |
| Power Supply Rejection Ratio (PSRR) | 88dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Bias Current-Max (IIB) @25C | 0.715μA |
| Nominal Gain Bandwidth Product | 10.5MHz |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1498IS8#TRPBF Datasheet
+8613715157867