LTC2621CDD#PBF OverviewThis package is included in the 10-WFDFN Exposed Pad package and is available for purchase. 3V volts power it. Using a Surface Mount connector, you can mount this FPGA module on the development board. In order to ensure a safe and efficient operation, it is important to maintain a temperature within 0°C~70°C at all times. Using the Tube layout, this FPGA model can be contained in a very small amount of space. The total number of terminations is 10. Parts related to this part can be found using its base part number LTC2621. The device is designed with 10 pins in total. It is possible for this FPGA to perform as per its specifications as long as it is mounted in Surface Mount direction. It is powered by a 3/5V battery, which can be purchased separately. The device has a total of 10 pins on it. In addition, it is able to support a maximum supply voltage of 5.5V. The unit is capable of working with a minimum supply voltage of 2.5V.
LTC2621CDD#PBF Features10-WFDFN Exposed Pad package
10 pin count
10 pins
LTC2621CDD#PBF ApplicationsThere are a lot of Linear Technology/Analog Devices
LTC2621CDD#PBF Digital to Analog Converters (DAC) applications.
Motor Control
Data Distribution System
Digital Potentiometer
Software Radio
Wireless infrastructure:
WCDMA, CDMA2000, TD-SCDMA, WiMAX
Wideband communications:
LMDS/MMDS, point-to-point
Instrumentation:
RF signal generators, arbitrary waveform generators
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 14 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 1.88mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC2621 |
| Pin Count | 10 |
| Output Type | Voltage - Buffered |
| Power Supplies | 3/5V |
| Interface | SPI, Serial |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 375μA |
| Number of Bits | 12 |
| Converter Type | D/A CONVERTER |
| Supply Type | Single |
| Reference Type | External |
| Data Interface | SPI |
| Differential Output | No |
| Resolution | 1.5 B |
| Voltage - Supply, Analog | 2.5V~5.5V |
| Voltage - Supply, Digital | 2.5V~5.5V |
| Settling Time | 7μs (Typ) |
| Linearity Error-Max (EL) | 0.0977% |
| Integral Nonlinearity (INL) | 4 LSB |
| Input Bit Code | BINARY |
| Number of Converters | 1 |
| INL/DNL (LSB) | ±0.8, ±0.5 (Max) |
| Length | 3mm |
| Height Seated (Max) | 0.8mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC2621CDD#PBF Datasheet
+8613715157867