MC10EP11DR2 Overview
It is available in the case 8-SOIC (0.154, 3.90mm Width) for this cut smart buffer. Using a supply voltage of 3.3V allows for high efficiency. Consequently, it will be mounted by Surface Mount. There is a classification of Fanout Buffer (Distribution) for this electronic part. It has a number of pins of 8. It is part of the 10EP family of electronic buffer ICs. It's set to 5.5V for the maximum supply voltage (Vsup). A logic IC with a value of LOW SKEW CLOCK DRIVER is used for this application. To ensure normal operation of the cut smart buffer, the supply voltage (Vsup) should always be kept above 3V. Power for the clock buffer comes from a -3.0/-5.5/3.3V volt supply. It is possible to get 2 true outputs. A component of the * series can be found in this electrical part. The supply voltage should be kept at -3.3, -5, 3.3, 5 V in order to obtain maximum efficiency. It is also possible to obtain NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V by using this gadget. For stable operation, the maximum operating temperature should not exceed 85°C°C. As part of its reliability, it operates at a minimum of -40°C degrees Celsius. In this case, the 8 terminal is used.
MC10EP11DR2 Features
logic IC type of LOW SKEW CLOCK DRIVER

MC10EP11DR2 Applications
There are a lot of ON SEMICONDUCTOR
MC10EP11DR2 Clock Buffers & Drivers applications.

High performance communication system
Data center
Cloud computing
Network
High speed industry
High-end consumer electronics
Data communication
Telecommunications
Computing
Medical imaging

Factory Lead Time	[object Object]
Surface Mount	YES
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Supplier Device Package	8-SOIC
Number of Terminals	8
Supplier Package	SOIC N
Minimum Operating Supply Voltage	-3, 3 V
Maximum Propagation Delay Time @ Maximum CL	0.27@3V to 5.5V ns
Maximum Operating Supply Voltage	-5.5, 5.5 V
Number of Outputs per Chip	4
Mounting	Surface Mount
Package	Bulk
Base Product Number	MC10EP11
Mfr	onsemi
Product Status	Active
Series	*
JESD-609 Code	e0
Type	Fanout Buffer (Distribution)
Terminal Finish	Tin/Lead (Sn80Pb20)
Additional Feature	NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V
HTS Code	8542.39.00.01
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	1.27mm
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Pin Count	8
JESD-30 Code	R-PDSO-G8
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Operating Supply Voltage	-3.3, -5, 3.3, 5 V
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	-3.0/-5.5/3.3V
Temperature Grade	INDUSTRIAL
Supply Voltage-Min (Vsup)	3V
Family	10EP
Seated Height-Max	1.75mm
Ratio - Input:Output	1:2
Logic IC Type	LOW SKEW CLOCK DRIVER
Prop. Delay@Nom-Sup	0.32 ns
Propagation Delay (tpd)	0.3 ns
Same Edge Skew-Max (tskwd)	0.12 ns
Number of True Outputs	2
Input Conditioning	DIFFERENTIAL
Length	4.9mm
Width	3.9mm
RoHS Status	Non-RoHS Compliant