MC10H642FNR2 Overview
You can find it in the package Tape & Reel (TR). A 28-LCC (J-Lead)-serial number is attached to the packaging of this product, which is packaged in a case. There is a recommended mounting type of Surface Mount. Clock program has 28 terminations. Parts with 5V voltage are provided by the part. Run 240 using the peak reflow temperature of this part. A device with 1 has been detected. normaloperation is restricted to 100MHz frequency. There is 5.25V supply voltage (Vsup) greater than 5.25V. The supply voltage (Vsup) should be kept above 4.75V during normaloperation. 0°C~85°C can operate at a variety of temperatures. The component can provide a voltage of 4.75V~5.25V. In this component, 68030, 68040 MPUs is the primary function. The output is set to TTL. 2006 parts of this part have been published. The base part number MC10H642 is the place where you can start your search for information. The Surface Mount mount is recommended. 28 pins are present on the device. There are 28 pins 28 this board. You can search for parts associated with the 10H family based on the part number. This device uses a type LOW SKEW CLOCK DRIVER logic IC.
MC10H642FNR2 Features
Mounting Type: Surface Mount
Peak Reflow Temperature (Cel): 240
Include 1 Circuits
run the output at th range of TTL
with 28 Pins
Logic IC Type: LOW SKEW CLOCK DRIVER

MC10H642FNR2 Applications
There are a lot of ON Semiconductor
MC10H642FNR2 application specific timer applications.

Broadcast video/audio timing
Processor and FPGA clocking
Any-frequency clock conversion
MSAN/DSLAM/PON
Fibre Channel, SAN
Telecom line cards
1 GbE and 10 GbE
Servers, Storage, Search Acceleration
Ethernet Switches, Routers
Small Cells, Mobile Backhaul/Fronthaul

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	0°C~85°C
Packaging	Tape & Reel (TR)
Published	2006
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Terminal Finish	Tin/Lead (Sn/Pb)
Voltage - Supply	4.75V~5.25V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MC10H642
Output	TTL
Pin Count	28
Supply Voltage-Max (Vsup)	5.25V
Power Supplies	5V
Supply Voltage-Min (Vsup)	4.75V
Number of Circuits	1
Frequency (Max)	100MHz
Family	10H
Input	ECL, TTL
Ratio - Input:Output	2:8
Logic IC Type	LOW SKEW CLOCK DRIVER
PLL	No
Differential - Input:Output	Yes/Yes
Propagation Delay (tpd)	5.75 ns
Main Purpose	68030, 68040 MPUs
Same Edge Skew-Max (tskwd)	0.5 ns
Height Seated (Max)	4.57mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead