NCV33074ADTBR2G OverviewOp amp is packaged in 14-TSSOP (0.173, 4.40mm Width) case. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. Linear amplifier has a total of 14 pins. Please take in mind that op amp should be run at 15V. Linear amplifier includes 14 pins. Regarding input offset voltage, buffer amplifier rates 3mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~85°C TA. Operational amplifier can operate supply current at 1.9mA. You should keep the voltage gain at 100dB for the time being. Op amp has total of 4 elements. The operating supply voltage of instrumentation amplifier is rated 22V voltage. It is used TAPE AND REEL to pack the op amps. Automotive, AEC-Q100 corresponds to linear amplifier's series.
NCV33074ADTBR2G Features14 Pins
supply voltage of 15V
100dB voltage gain
NCV33074ADTBR2G ApplicationsThere are a lot of ON Semiconductor
NCV33074ADTBR2G Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 11 Weeks |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Published | 2009 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCV33074 |
| Pin Count | 14 |
| Operating Supply Voltage | 22V |
| Number of Elements | 4 |
| Power Supplies | +-15V |
| Operating Supply Current | 1.9mA |
| Nominal Supply Current | 1.9mA |
| Output Current | 30mA |
| Slew Rate | 13V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 3V~44V ±1.5V~22V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 4.5MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 4500 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.7μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 500μV |
| Bias Current-Max (IIB) @25C | 0.5μA |
| Nominal Gain Bandwidth Product | 4.5MHz |
| Length | 5mm |
| Height Seated (Max) | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV33074ADTBR2G Datasheet
+8613715157867