OP497FSZ OverviewIn order to protect the op amps, a 16-SOIC (0.295, 7.50mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 16. It consists of a total of 16 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 16 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 75μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 2.5mA and 10 . Maintain 132.04dB as the voltage gain. Buffer op amp is equipped with 4 channels on the device. There is an 625μA quiescent current in linear amplifier.
OP497FSZ Features16 Pins
supply voltage of 15V
132.04dB voltage gain
OP497FSZ ApplicationsThere are a lot of Analog Devices Inc.
OP497FSZ Instrumentational OP Amps applications.
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | OP497 |
| Pin Count | 16 |
| Power Supplies | +-15V |
| Number of Channels | 4 |
| Operating Supply Current | 2.5mA |
| Quiescent Current | 625μA |
| Supply Current-Max | 3mA |
| Slew Rate | 0.15V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 135 dB |
| Current - Input Bias | 40pA |
| Voltage - Supply, Single/Dual (±) | ±2V~20V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 75μV |
| Bandwidth | 500 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 500 kHz |
| Voltage Gain | 132.04dB |
| Average Bias Current-Max (IIB) | 0.0002μA |
| Power Supply Rejection Ratio (PSRR) | 135dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Voltage - Input Offset | 40μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.00015μA |
| Dual Supply Voltage | 9V |
| Input Capacitance | 3pF |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Input Voltage Noise Density | 17nV/sqrt Hz |
| Height | 2.35mm |
| Length | 10.5mm |
| Width | 7.6mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
OP497FSZ Datasheet
+8613715157867