OPA2835IDGSR OverviewPackaging for the buffer amplifier is in the form of a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case. A Voltage Feedback-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 10 terminations have been reported in the past few weeks. Buffer amplifier has a total of 10 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.7V. An 10-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 250μA , this buffer op amp will be able to operate. Keeping the voltage gain at 120dB is the best course of action. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A total of 2 elements are present in this linear amplifier. A TR-shaped amplifier is used to pack the buffer amps.
OPA2835IDGSR Features10 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
OPA2835IDGSR ApplicationsThere are a lot of Texas Instruments
OPA2835IDGSR Instrumentational OP Amps applications.
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | OPA2835 |
| Pin Count | 10 |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Operating Supply Current | 250μA |
| Supply Current-Max | 0.7mA |
| Slew Rate | 160V/μs |
| Amplifier Type | Voltage Feedback |
| Common Mode Rejection Ratio | 91 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V ±1.25V~2.75V |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 100μV |
| Gain Bandwidth Product | 31MHz |
| Unity Gain BW-Nom | 30000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.4μA |
| Power Supply Rejection Ratio (PSRR) | 93dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Settling Time | 55 ns |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 56MHz |
| Bias Current-Max (IIB) @25C | 0.4μA |
| Programmable Power | NO |
| Max I/O Voltage | 500μV |
| Wideband | NO |
| Input Offset Current-Max (IIO) | 0.1μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867