OPA4180IPWR OverviewThe linear amplifier is packaged in a 14-TSSOP (0.173, 4.40mm Width) case. This is a Zero-Drift type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. The buffer op amp includes 14 pins. Regarding input offset voltage, op amp rates 15μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 450μA. Voltage gain should remain at 120dB. There are 4 circuits on this op amp. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. TR is adopted to pack the instrumentation amplifier.
OPA4180IPWR Features14 Pins
120dB voltage gain
Output Type: Rail-to-Rail
OPA4180IPWR ApplicationsThere are a lot of Texas Instruments
OPA4180IPWR Instrumentational OP Amps applications.
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Base Part Number | OPA4180 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Number of Circuits | 4 |
| Operating Supply Current | 450μA |
| Nominal Supply Current | 450μA |
| Slew Rate | 0.8V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Zero-Drift |
| Common Mode Rejection Ratio | 104 dB |
| Current - Input Bias | 250pA |
| Max Input Voltage | 18V |
| Voltage - Supply, Single/Dual (±) | 4V~36V ±2V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 15μV |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.006μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.001μA |
| Programmable Power | NO |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 2MHz |
| Max I/O Voltage | 75μV |
| Wideband | NO |
| Power | NO |
| Input Voltage Noise Density | 10nV/sqrt Hz |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867