SC16C752IB48,528 Overview
The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.The configuration of this device includes 48 terminations.For its operation, a voltage of 3.3V is provided as the supply voltage.There are 2 serial I/Os available for communication of data.The electronic device is a type of integrated circuit with a pin count of 48.There is a 80MHz clock frequency for this IC.The device is capable of operating at a maximum temperature of 85°C.Further to this, it has also been demonstrated to be able to perform ALSO OPERATES AT 2.5 V SUPPLY.At a minimum temperature of -40°C, it is capable of operating.By maintaining a voltage lower than 3.63V, normal operation can be assured.In order to keep the system functioning normally, the supply voltage must be maintained above 2.97V.
SC16C752IB48,528 Features
2 serial I/Os
Clock frequency of 80MHz
ALSO OPERATES AT 2.5 V SUPPLY

SC16C752IB48,528 Applications
There are a lot of NXP Semiconductors / Freescale
SC16C752IB48,528 UARTs applications.

Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems

Surface Mount	YES
Number of Terminations	48
Additional Feature	ALSO OPERATES AT 2.5 V SUPPLY
Terminal Position	QUAD
Terminal Form	GULL WING
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Pin Count	48
JESD-30 Code	S-PQFP-G48
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Supply Voltage-Max (Vsup)	3.63V
Temperature Grade	INDUSTRIAL
Supply Voltage-Min (Vsup)	2.97V
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	80MHz
Address Bus Width	3
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Number of Serial I/Os	2
Data Transfer Rate-Max	0.625 MBps
Communication Protocol	ASYNC, BIT
Length	7mm
Height Seated (Max)	1.6mm
Width	7mm
RoHS Status	Non-RoHS Compliant