TL16C752CIRHBRG4 Overview
This product is available in a cost-effective package called 32-VFQFN Exposed Pad.The transmission is conducted over 2, DUART channels.Tape & Reel (TR) is used in terms of packaging.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.The configuration of this device includes 32 terminations.For its operation, a voltage of 5V is provided as the supply voltage.As of right now, this electronic part is in a Active status.There are 2 serial I/Os available for communication of data.A method of mounting it is through Surface Mount.There is a voltage supply of 0 volts for the device.The electronic device is a type of integrated circuit with a pin count of 32.There is a 48MHz clock frequency for this IC.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 0°C.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of 70°C.The configuration relies on the 32 pins.Surface Mount is the method used to mount it.UART operates at 5V voltage to maintain high efficiency.Further to this, it has also been demonstrated to be able to perform ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY.TL16C752 is set as the base part number for the part.Universal asynchronous receiver-transmitter is allowed to have a maximum supply current of 4.5mA.
TL16C752CIRHBRG4 Features
2 serial I/Os
Clock frequency of 48MHz
Operating supply voltage of 5V
ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY

TL16C752CIRHBRG4 Applications
There are a lot of Texas Instruments
TL16C752CIRHBRG4 UARTs applications.

Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems

Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	32-VFQFN Exposed Pad
Number of Pins	32
Weight	71.809342mg
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	32
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Additional Feature	ALSO OPERATES AT 1.8V/2.5V/3.3V SUPPLY
HTS Code	8542.31.00.01
Voltage - Supply	1.62V~5.5V
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	TL16C752
Pin Count	32
Operating Supply Voltage	5V
Temperature Grade	INDUSTRIAL
Number of Channels	2, DUART
Nominal Supply Current	4.5mA
Max Supply Current	4.5mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	48MHz
Address Bus Width	3
Protocol	RS485
Boundary Scan	NO
Low Power Mode	NO
External Data Bus Width	8
Data Rate (Max)	3Mbps
Number of Serial I/Os	2
Data Transfer Rate-Max	0.375 MBps
FIFO's	64 Byte
With False Start Bit Detection	Yes
Length	5mm
Height Seated (Max)	1mm
Width	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free