SC28L202A1DGG/G:11 Overview
There is a cost-effective 56-TFSOP (0.240, 6.10mm Width) package available for this product.The transmission of data takes place over 1, UART channels.For packaging purposes, Tube is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 56 terminations.For its operation, it requires a supply voltage of 5V.At present, this electronic part has a status of Obsolete.Data is communicated via 2 serial I/Os.Mounting it through Surface Mount is possible.During operation, the supply voltage is set to 3.3V 5V.Electronic devices such as this are known as 56-pin integrated circuits.There is 50MHz clock frequency measured on this IC.There are some characteristics of Configurable GPIO, Internal Oscillator, Timer/Counter that it possesses.85°C is the maximum temperature that it can operate at.Furthermore, it has the ability to perform ALSO OPERATES AT 3.3V SUPPLY as well.Basically, it uses SC28L202A as its base part number.A minimum of -40°C is required for operation.Universal asynchronous receiver-transmitter is classified as a Impact series electronic component.
SC28L202A1DGG/G:11 Features
2 serial I/Os
Clock frequency of 50MHz
ALSO OPERATES AT 3.3V SUPPLY

SC28L202A1DGG/G:11 Applications
There are a lot of NXP USA Inc.
SC28L202A1DGG/G:11 UARTs applications.

Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules

Mounting Type	Surface Mount
Package / Case	56-TFSOP (0.240, 6.10mm Width)
Surface Mount	YES
Packaging	Tube
Series	Impact
Published	2003
JESD-609 Code	e4
Feature	Configurable GPIO, Internal Oscillator, Timer/Counter
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	56
Terminal Finish	NICKEL PALLADIUM GOLD
Additional Feature	ALSO OPERATES AT 3.3V SUPPLY
HTS Code	8542.31.00.01
Voltage - Supply	3.3V 5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	SC28L202A
Pin Count	56
JESD-30 Code	R-PDSO-G56
Qualification Status	Not Qualified
Operating Temperature (Max)	85°C
Operating Temperature (Min)	-40°C
Temperature Grade	INDUSTRIAL
Number of Channels	1, UART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	50MHz
Address Bus Width	7
Protocol	RS485
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Data Rate (Max)	3.125Mbps
Number of Serial I/Os	2
Bus Compatibility	68XXX; 80XXX
Data Transfer Rate-Max	0.375 MBps
Data Encoding/Decoding Method	NRZ
FIFO's	256 Byte
With Modem Control	Yes
Length	14mm
Height Seated (Max)	1.2mm
Width	6.1mm
RoHS Status	ROHS3 Compliant